cern.colt.list.tbyte

Class ByteArrayList

java.lang.Object

cern.colt.PersistentObject

cern.colt.list.AbstractCollection

cern.colt.list.AbstractList

cern.colt.list.tbyte.AbstractByteList

cern.colt.list.tbyte.ByteArrayList

All Implemented Interfaces:

Serializable, Cloneable

public class ByteArrayList
extends AbstractByteList

Resizable list holding byte elements; implemented with arrays. First see the package summary and javadoc tree view to get the broad picture.

See Also:

Serialized Form

Constructor Summary

Constructors

Constructor and Description
ByteArrayList() Constructs an empty list.
ByteArrayList(byte[] elements) Constructs a list containing the specified elements.
ByteArrayList(int initialCapacity) Constructs an empty list with the specified initial capacity.

Method Summary

Methods

Modifier and Type	Method and Description
void	add(byte element) Appends the specified element to the end of this list.
void	beforeInsert(int index, byte element) Inserts the specified element before the specified position into the receiver.
int	binarySearchFromTo(byte key, int from, int to) Searches the receiver for the specified value using the binary search algorithm.
Object	clone() Returns a deep copy of the receiver.
ByteArrayList	copy() Returns a deep copy of the receiver; uses clone() and casts the result.
void	countSortFromTo(int from, int to) Sorts the specified range of the receiver into ascending numerical order.
byte[]	elements() Returns the elements currently stored, including invalid elements between size and capacity, if any.
AbstractByteList	elements(byte[] elements) Sets the receiver's elements to be the specified array (not a copy of it).
void	ensureCapacity(int minCapacity) Ensures that the receiver can hold at least the specified number of elements without needing to allocate new internal memory.
boolean	equals(Object otherObj) Compares the specified Object with the receiver.
boolean	forEach(ByteProcedure procedure) Applies a procedure to each element of the receiver, if any.
byte	get(int index) Returns the element at the specified position in the receiver.
byte	getQuick(int index) Returns the element at the specified position in the receiver; WARNING: Does not check preconditions.
int	indexOfFromTo(byte element, int from, int to) Returns the index of the first occurrence of the specified element.
int	lastIndexOfFromTo(byte element, int from, int to) Returns the index of the last occurrence of the specified element.
AbstractByteList	partFromTo(int from, int to) Returns a new list of the part of the receiver between from, inclusive, and to, inclusive.
boolean	removeAll(AbstractByteList other) Removes from the receiver all elements that are contained in the specified list.
void	replaceFromToWithFrom(int from, int to, AbstractByteList other, int otherFrom) Replaces a number of elements in the receiver with the same number of elements of another list.
boolean	retainAll(AbstractByteList other) Retains (keeps) only the elements in the receiver that are contained in the specified other list.
void	reverse() Reverses the elements of the receiver.
void	set(int index, byte element) Replaces the element at the specified position in the receiver with the specified element.
void	setQuick(int index, byte element) Replaces the element at the specified position in the receiver with the specified element; WARNING: Does not check preconditions.
void	shuffleFromTo(int from, int to) Randomly permutes the part of the receiver between from (inclusive) and to (inclusive).
void	sortFromTo(int from, int to) Sorts the specified range of the receiver into ascending order.
void	trimToSize() Trims the capacity of the receiver to be the receiver's current size.

Methods inherited from class cern.colt.list.tbyte.AbstractByteList

addAllOfFromTo, beforeInsertAllOfFromTo, binarySearch, contains, delete, fillFromToWith, indexOf, lastIndexOf, mergeSortFromTo, mergeSortFromTo, quickSortFromTo, quickSortFromTo, removeFromTo, replaceFromToWithFromTo, replaceFromWith, size, times, toList, toString

Methods inherited from class cern.colt.list.AbstractList

addAllOf, beforeInsertAllOf, clear, mergeSort, quickSort, remove, setSize, shuffle, sort

Methods inherited from class cern.colt.list.AbstractCollection

isEmpty

Methods inherited from class java.lang.Object

getClass, hashCode, notify, notifyAll, wait, wait, wait

Constructor Detail

ByteArrayList

public ByteArrayList()

Constructs an empty list.

ByteArrayList

public ByteArrayList(byte[] elements)

Constructs a list containing the specified elements. The initial size and capacity of the list is the length of the array. WARNING: For efficiency reasons and to keep memory usage low, the array is not copied. So if subsequently you modify the specified array directly via the [] operator, be sure you know what you're doing.

Parameters:

elements - the array to be backed by the the constructed list

ByteArrayList

public ByteArrayList(int initialCapacity)

Constructs an empty list with the specified initial capacity.

Parameters:

initialCapacity - the number of elements the receiver can hold without auto-expanding itself by allocating new internal memory.

Method Detail

add

public void add(byte element)

Appends the specified element to the end of this list.

Overrides:

add in class AbstractByteList

Parameters:

element - element to be appended to this list.

beforeInsert

public void beforeInsert(int index,
                byte element)

Inserts the specified element before the specified position into the receiver. Shifts the element currently at that position (if any) and any subsequent elements to the right.

Overrides:

beforeInsert in class AbstractByteList

Parameters:

index - index before which the specified element is to be inserted (must be in [0,size]).

element - element to be inserted.

Throws:

IndexOutOfBoundsException - index is out of range ( index < 0 || index > size()).

binarySearchFromTo

public int binarySearchFromTo(byte key,
                     int from,
                     int to)

Searches the receiver for the specified value using the binary search algorithm. The receiver must must be sorted (as by the sort method) prior to making this call. If it is not sorted, the results are undefined: in particular, the call may enter an infinite loop. If the receiver contains multiple elements equal to the specified object, there is no guarantee which instance will be found.

Overrides:

binarySearchFromTo in class AbstractByteList

Parameters:

key - the value to be searched for.

from - the leftmost search position, inclusive.

to - the rightmost search position, inclusive.

Returns:

index of the search key, if it is contained in the receiver; otherwise, (-(insertion point) - 1). The insertion point is defined as the the point at which the value would be inserted into the receiver: the index of the first element greater than the key, or receiver.size(), if all elements in the receiver are less than the specified key. Note that this guarantees that the return value will be >= 0 if and only if the key is found.

See Also:

Sorting, Arrays

clone

public Object clone()

Returns a deep copy of the receiver.

Overrides:

clone in class AbstractByteList

Returns:

a deep copy of the receiver.

copy

public ByteArrayList copy()

Returns a deep copy of the receiver; uses clone() and casts the result.

Returns:

a deep copy of the receiver.

countSortFromTo

public void countSortFromTo(int from,
                   int to)

Sorts the specified range of the receiver into ascending numerical order. The sorting algorithm is a count sort. This algorithm offers guaranteed O(Max(n,256)) performance.

Parameters:

from - the index of the first element (inclusive) to be sorted.

to - the index of the last element (inclusive) to be sorted.

elements

public byte[] elements()

Returns the elements currently stored, including invalid elements between size and capacity, if any. WARNING: For efficiency reasons and to keep memory usage low, the array is not copied. So if subsequently you modify the returned array directly via the [] operator, be sure you know what you're doing.

Overrides:

elements in class AbstractByteList

Returns:

the elements currently stored.

elements

public AbstractByteList elements(byte[] elements)

Sets the receiver's elements to be the specified array (not a copy of it). The size and capacity of the list is the length of the array. WARNING: For efficiency reasons and to keep memory usage low, the array is not copied. So if subsequently you modify the specified array directly via the [] operator, be sure you know what you're doing.

Overrides:

elements in class AbstractByteList

Parameters:

elements - the new elements to be stored.

Returns:

the receiver itself.

ensureCapacity

public void ensureCapacity(int minCapacity)

Ensures that the receiver can hold at least the specified number of elements without needing to allocate new internal memory. If necessary, allocates new internal memory and increases the capacity of the receiver.

Specified by:

ensureCapacity in class AbstractByteList

Parameters:

minCapacity - the desired minimum capacity.

equals

public boolean equals(Object otherObj)

Compares the specified Object with the receiver. Returns true if and only if the specified Object is also an ArrayList of the same type, both Lists have the same size, and all corresponding pairs of elements in the two Lists are identical. In other words, two Lists are defined to be equal if they contain the same elements in the same order.

Overrides:

equals in class AbstractByteList

Parameters:

otherObj - the Object to be compared for equality with the receiver.

Returns:

true if the specified Object is equal to the receiver.

forEach

public boolean forEach(ByteProcedure procedure)

Applies a procedure to each element of the receiver, if any. Starts at index 0, moving rightwards.

Overrides:

forEach in class AbstractByteList

Parameters:

procedure - the procedure to be applied. Stops iteration if the procedure returns false, otherwise continues.

Returns:

false if the procedure stopped before all elements where iterated over, true otherwise.

get

public byte get(int index)

Returns the element at the specified position in the receiver.

Overrides:

get in class AbstractByteList

Parameters:

index - index of element to return.

Throws:

IndexOutOfBoundsException - index is out of range (index < 0 || index >= size()).

getQuick

public byte getQuick(int index)

Returns the element at the specified position in the receiver; WARNING: Does not check preconditions. Provided with invalid parameters this method may return invalid elements without throwing any exception! You should only use this method when you are absolutely sure that the index is within bounds. Precondition (unchecked): index >= 0 && index < size().

Parameters:

index - index of element to return.

indexOfFromTo

public int indexOfFromTo(byte element,
                int from,
                int to)

Returns the index of the first occurrence of the specified element. Returns -1 if the receiver does not contain this element. Searches between from, inclusive and to, inclusive. Tests for identity.

Overrides:

indexOfFromTo in class AbstractByteList

Parameters:

element - element to search for.

from - the leftmost search position, inclusive.

to - the rightmost search position, inclusive.

Returns:

the index of the first occurrence of the element in the receiver; returns -1 if the element is not found.

Throws:

IndexOutOfBoundsException - index is out of range ( size()>0 && (from<0 || from>to || to>=size()) ).

lastIndexOfFromTo

public int lastIndexOfFromTo(byte element,
                    int from,
                    int to)

Returns the index of the last occurrence of the specified element. Returns -1 if the receiver does not contain this element. Searches beginning at to, inclusive until from, inclusive. Tests for identity.

Overrides:

lastIndexOfFromTo in class AbstractByteList

Parameters:

element - element to search for.

from - the leftmost search position, inclusive.

to - the rightmost search position, inclusive.

Returns:

the index of the last occurrence of the element in the receiver; returns -1 if the element is not found.

Throws:

IndexOutOfBoundsException - index is out of range ( size()>0 && (from<0 || from>to || to>=size()) ).

partFromTo

public AbstractByteList partFromTo(int from,
                          int to)

Returns a new list of the part of the receiver between from, inclusive, and to, inclusive.

Overrides:

partFromTo in class AbstractByteList

Parameters:

from - the index of the first element (inclusive).

to - the index of the last element (inclusive).

Returns:

a new list

Throws:

IndexOutOfBoundsException - index is out of range ( size()>0 && (from<0 || from>to || to>=size()) ).

removeAll

public boolean removeAll(AbstractByteList other)

Removes from the receiver all elements that are contained in the specified list. Tests for identity.

Overrides:

removeAll in class AbstractByteList

Parameters:

other - the other list.

Returns:

true if the receiver changed as a result of the call.

replaceFromToWithFrom

public void replaceFromToWithFrom(int from,
                         int to,
                         AbstractByteList other,
                         int otherFrom)

Replaces a number of elements in the receiver with the same number of elements of another list. Replaces elements in the receiver, between from (inclusive) and to (inclusive), with elements of other, starting from otherFrom (inclusive).

Overrides:

replaceFromToWithFrom in class AbstractByteList

Parameters:

from - the position of the first element to be replaced in the receiver

to - the position of the last element to be replaced in the receiver

other - list holding elements to be copied into the receiver.

otherFrom - position of first element within other list to be copied.

retainAll

public boolean retainAll(AbstractByteList other)

Retains (keeps) only the elements in the receiver that are contained in the specified other list. In other words, removes from the receiver all of its elements that are not contained in the specified other list.

Overrides:

retainAll in class AbstractByteList

Parameters:

other - the other list to test against.

Returns:

true if the receiver changed as a result of the call.

reverse

public void reverse()

Reverses the elements of the receiver. Last becomes first, second last becomes second first, and so on.

Overrides:

reverse in class AbstractByteList

set

public void set(int index,
       byte element)

Replaces the element at the specified position in the receiver with the specified element.

Overrides:

set in class AbstractByteList

Parameters:

index - index of element to replace.

element - element to be stored at the specified position.

Throws:

IndexOutOfBoundsException - index is out of range (index < 0 || index >= size()).

setQuick

public void setQuick(int index,
            byte element)

Replaces the element at the specified position in the receiver with the specified element; WARNING: Does not check preconditions. Provided with invalid parameters this method may access invalid indexes without throwing any exception! You should only use this method when you are absolutely sure that the index is within bounds. Precondition (unchecked): index >= 0 && index < size().

Parameters:

index - index of element to replace.

element - element to be stored at the specified position.

shuffleFromTo

public void shuffleFromTo(int from,
                 int to)

Randomly permutes the part of the receiver between from (inclusive) and to (inclusive).

Overrides:

shuffleFromTo in class AbstractByteList

Parameters:

from - the index of the first element (inclusive) to be permuted.

to - the index of the last element (inclusive) to be permuted.

Throws:

IndexOutOfBoundsException - index is out of range ( size()>0 && (from<0 || from>to || to>=size()) ).

sortFromTo

public void sortFromTo(int from,
              int to)

Sorts the specified range of the receiver into ascending order. The sorting algorithm is countsort.

Overrides:

sortFromTo in class AbstractList

Parameters:

from - the index of the first element (inclusive) to be sorted.

to - the index of the last element (inclusive) to be sorted.

Throws:

IndexOutOfBoundsException - index is out of range ( size()>0 && (from<0 || from>to || to>=size()) ).

trimToSize

public void trimToSize()

Trims the capacity of the receiver to be the receiver's current size. Releases any superfluos internal memory. An application can use this operation to minimize the storage of the receiver.

Overrides:

trimToSize in class AbstractList