- qr(DComplexMatrix2D, int) - Method in class cern.colt.matrix.tdcomplex.algo.SparseDComplexAlgebra
-
Constructs and returns the QR-decomposition of the given matrix.
- qr(DoubleMatrix2D) - Method in class cern.colt.matrix.tdouble.algo.DenseDoubleAlgebra
-
Constructs and returns the QR-decomposition of the given matrix.
- qr(DoubleMatrix2D, int) - Method in class cern.colt.matrix.tdouble.algo.SparseDoubleAlgebra
-
Constructs and returns the QR-decomposition of the given matrix.
- qr(FloatMatrix2D) - Method in class cern.colt.matrix.tfloat.algo.DenseFloatAlgebra
-
Constructs and returns the QR-decomposition of the given matrix.
- qr(FloatMatrix2D, int) - Method in class cern.colt.matrix.tfloat.algo.SparseFloatAlgebra
-
Constructs and returns the QR-decomposition of the given matrix.
- quantile(DoubleArrayList, double) - Static method in class cern.jet.stat.tdouble.DoubleDescriptive
-
Returns the phi-quantile; that is, an element elem for
which holds that phi percent of data elements are less than
elem.
- quantile(FloatArrayList, float) - Static method in class cern.jet.stat.tfloat.FloatDescriptive
-
Returns the phi-quantile; that is, an element elem for
which holds that phi percent of data elements are less than
elem.
- quantile(double) - Static method in class hep.aida.tdouble.bin.DoubleBinFunctions1D
-
Function that returns bin.quantile(percentage).
- quantile(double) - Method in class hep.aida.tdouble.bin.DynamicDoubleBin1D
-
Returns the exact phi-quantile; that is, the smallest contained
element elem for which holds that phi percent of
elements are less than elem.
- quantile(double) - Method in class hep.aida.tdouble.bin.QuantileDoubleBin1D
-
Computes and returns the phi-quantile.
- quantile(float) - Method in class hep.aida.tfloat.bin.DynamicFloatBin1D
-
Returns the exact phi-quantile; that is, the smallest contained
element elem for which holds that phi percent of
elements are less than elem.
- quantile(float) - Static method in class hep.aida.tfloat.bin.FloatBinFunctions1D
-
Function that returns bin.quantile(percentage).
- quantile(float) - Method in class hep.aida.tfloat.bin.QuantileFloatBin1D
-
Computes and returns the phi-quantile.
- QuantileDoubleBin1D - Class in hep.aida.tdouble.bin
-
1-dimensional non-rebinnable bin holding double elements with
scalable quantile operations defined upon; Using little main memory, quickly
computes approximate quantiles over very large data sequences with and even
without a-priori knowledge of the number of elements to be filled;
Conceptually a strongly lossily compressed multiset (or bag); Guarantees to
respect the worst case approximation error specified upon instance
construction.
- QuantileDoubleBin1D(double) - Constructor for class hep.aida.tdouble.bin.QuantileDoubleBin1D
-
Equivalent to
new QuantileBin1D(false, Long.MAX_VALUE, epsilon, 0.001, 10000, new cern.jet.random.engine.DRand(new java.util.Date())
.
- QuantileDoubleBin1D(boolean, long, double, double, int, DoubleRandomEngine) - Constructor for class hep.aida.tdouble.bin.QuantileDoubleBin1D
-
Equivalent to
new QuantileBin1D(known_N, N, epsilon, delta, quantiles, randomGenerator, false, false, 2)
.
- QuantileDoubleBin1D(boolean, long, double, double, int, DoubleRandomEngine, boolean, boolean, int) - Constructor for class hep.aida.tdouble.bin.QuantileDoubleBin1D
-
Constructs and returns an empty bin that, under the given constraints,
minimizes the amount of memory needed.
- quantileElements(DoubleArrayList) - Method in interface cern.jet.stat.tdouble.quantile.DoubleQuantileFinder
-
Computes the specified quantile elements over the values previously
added.
- quantileElements(DoubleArrayList) - Method in class cern.jet.stat.tdouble.quantile.ExactDoubleQuantileFinder
-
Computes the specified quantile elements over the values previously
added.
- quantileElements(FloatArrayList) - Method in interface cern.jet.stat.tfloat.quantile.FloatQuantileFinder
-
Computes the specified quantile elements over the values previously
added.
- QuantileFloatBin1D - Class in hep.aida.tfloat.bin
-
1-dimensional non-rebinnable bin holding float elements with
scalable quantile operations defined upon; Using little main memory, quickly
computes approximate quantiles over very large data sequences with and even
without a-priori knowledge of the number of elements to be filled;
Conceptually a strongly lossily compressed multiset (or bag); Guarantees to
respect the worst case approximation error specified upon instance
construction.
- QuantileFloatBin1D(float) - Constructor for class hep.aida.tfloat.bin.QuantileFloatBin1D
-
Equivalent to
new QuantileBin1D(false, Long.MAX_VALUE, epsilon, 0.001, 10000, new cern.jet.random.engine.DRand(new java.util.Date())
.
- QuantileFloatBin1D(boolean, long, float, float, int, FloatRandomEngine) - Constructor for class hep.aida.tfloat.bin.QuantileFloatBin1D
-
Equivalent to
new QuantileBin1D(known_N, N, epsilon, delta, quantiles, randomGenerator, false, false, 2)
.
- QuantileFloatBin1D(boolean, long, float, float, int, FloatRandomEngine, boolean, boolean, int) - Constructor for class hep.aida.tfloat.bin.QuantileFloatBin1D
-
Constructs and returns an empty bin that, under the given constraints,
minimizes the amount of memory needed.
- quantileInverse(DoubleArrayList, double) - Static method in class cern.jet.stat.tdouble.DoubleDescriptive
-
Returns how many percent of the elements contained in the receiver are
<= element.
- quantileInverse(FloatArrayList, float) - Static method in class cern.jet.stat.tfloat.FloatDescriptive
-
Returns how many percent of the elements contained in the receiver are
<= element.
- quantileInverse(double) - Method in class hep.aida.tdouble.bin.DynamicDoubleBin1D
-
Returns exactly how many percent of the elements contained in the
receiver are <= element.
- quantileInverse(double) - Method in class hep.aida.tdouble.bin.QuantileDoubleBin1D
-
Returns how many percent of the elements contained in the receiver are
<= element.
- quantileInverse(float) - Method in class hep.aida.tfloat.bin.DynamicFloatBin1D
-
Returns exactly how many percent of the elements contained in the
receiver are <= element.
- quantileInverse(float) - Method in class hep.aida.tfloat.bin.QuantileFloatBin1D
-
Returns how many percent of the elements contained in the receiver are
<= element.
- quantiles(DoubleArrayList, DoubleArrayList) - Static method in class cern.jet.stat.tdouble.DoubleDescriptive
-
Returns the quantiles of the specified percentages.
- quantiles(FloatArrayList, FloatArrayList) - Static method in class cern.jet.stat.tfloat.FloatDescriptive
-
Returns the quantiles of the specified percentages.
- quantiles(DoubleArrayList) - Method in class hep.aida.tdouble.bin.DynamicDoubleBin1D
-
Returns the exact quantiles of the specified percentages.
- quantiles(DoubleArrayList) - Method in class hep.aida.tdouble.bin.QuantileDoubleBin1D
-
Returns the quantiles of the specified percentages.
- quantiles(FloatArrayList) - Method in class hep.aida.tfloat.bin.DynamicFloatBin1D
-
Returns the exact quantiles of the specified percentages.
- quantiles(FloatArrayList) - Method in class hep.aida.tfloat.bin.QuantileFloatBin1D
-
Returns the quantiles of the specified percentages.
- QuickBitVector - Class in cern.colt.matrix.tbit
-
Implements quick non polymorphic non bounds checking low level bitvector
operations.
- QuickOpenIntIntHashMap - Class in cern.colt.map.tint
-
Status: Experimental; Do not use for production yet.
- QuickOpenIntIntHashMap() - Constructor for class cern.colt.map.tint.QuickOpenIntIntHashMap
-
Constructs an empty map with default capacity and default load factors.
- QuickOpenIntIntHashMap(int) - Constructor for class cern.colt.map.tint.QuickOpenIntIntHashMap
-
Constructs an empty map with the specified initial capacity and default
load factors.
- QuickOpenIntIntHashMap(int, double, double) - Constructor for class cern.colt.map.tint.QuickOpenIntIntHashMap
-
Constructs an empty map with the specified initial capacity and the
specified minimum and maximum load factor.
- quickSort(int, int, IntComparator, Swapper) - Static method in class cern.colt.GenericSorting
-
Sorts the specified range of elements according to the order induced by
the specified comparator.
- quickSort() - Method in class cern.colt.list.AbstractList
-
Sorts the receiver into ascending order.
- quickSort - Static variable in class cern.colt.matrix.tdouble.algo.DoubleSorting
-
A prefabricated quicksort.
- quickSort - Static variable in class cern.colt.matrix.tfloat.algo.FloatSorting
-
A prefabricated quicksort.
- quickSort - Static variable in class cern.colt.matrix.tint.algo.IntSorting
-
A prefabricated quicksort.
- quickSort - Static variable in class cern.colt.matrix.tlong.algo.LongSorting
-
A prefabricated quicksort.
- quickSort - Static variable in class cern.colt.matrix.tobject.algo.ObjectSorting
-
A prefabricated quicksort.
- quickSort(byte[], int, int, ByteComparator, int) - Static method in class cern.colt.ParallelQuickSort
-
Multithreaded quicksort.
- quickSort(char[], int, int, CharComparator, int) - Static method in class cern.colt.ParallelQuickSort
-
Multithreaded quicksort.
- quickSort(double[], int, int, DoubleComparator, int) - Static method in class cern.colt.ParallelQuickSort
-
Multithreaded quicksort.
- quickSort(float[], int, int, FloatComparator, int) - Static method in class cern.colt.ParallelQuickSort
-
Multithreaded quicksort.
- quickSort(int[], int, int, IntComparator, int) - Static method in class cern.colt.ParallelQuickSort
-
Multithreaded quicksort.
- quickSort(long[], int, int, LongComparator, int) - Static method in class cern.colt.ParallelQuickSort
-
Multithreaded quicksort.
- quickSort(Object[], int, int, int) - Static method in class cern.colt.ParallelQuickSort
-
Multithreaded quicksort.
- quickSort(Object[], int, int, Comparator, int) - Static method in class cern.colt.ParallelQuickSort
-
Multithreaded quicksort.
- quickSort(short[], int, int, ShortComparator, int) - Static method in class cern.colt.ParallelQuickSort
-
Multithreaded quicksort.
- quickSort(byte[], int, int, ByteComparator) - Static method in class cern.colt.Sorting
-
Sorts the specified range of the specified array of elements according to
the order induced by the specified comparator.
- quickSort(char[], int, int, CharComparator) - Static method in class cern.colt.Sorting
-
Sorts the specified range of the specified array of elements according to
the order induced by the specified comparator.
- quickSort(double[], int, int, DoubleComparator) - Static method in class cern.colt.Sorting
-
Sorts the specified range of the specified array of elements according to
the order induced by the specified comparator.
- quickSort(float[], int, int, FloatComparator) - Static method in class cern.colt.Sorting
-
Sorts the specified range of the specified array of elements according to
the order induced by the specified comparator.
- quickSort(int[], int, int, IntComparator) - Static method in class cern.colt.Sorting
-
Sorts the specified range of the specified array of elements according to
the order induced by the specified comparator.
- quickSort(long[], int, int, LongComparator) - Static method in class cern.colt.Sorting
-
Sorts the specified range of the specified array of elements according to
the order induced by the specified comparator.
- quickSort(Object[]) - Static method in class cern.colt.Sorting
-
Sorts the specified range of the receiver into ascending order, according
to the natural ordering of its elements.
- quickSort(Object[], int, int) - Static method in class cern.colt.Sorting
-
Sorts the specified range of the receiver into ascending order, according
to the natural ordering of its elements.
- quickSort(Object[], int, int, Comparator) - Static method in class cern.colt.Sorting
-
Sorts the specified range of the specified array according to the order
induced by the specified comparator.
- quickSort(Object[], Comparator) - Static method in class cern.colt.Sorting
-
Sorts the specified array according to the order induced by the specified
comparator.
- quickSort(short[], int, int, ShortComparator) - Static method in class cern.colt.Sorting
-
Sorts the specified range of the specified array of elements according to
the order induced by the specified comparator.
- quickSortFromTo(int, int) - Method in class cern.colt.list.AbstractList
-
Sorts the specified range of the receiver into ascending order.
- quickSortFromTo(int, int) - Method in class cern.colt.list.tboolean.BooleanArrayList
-
Sorts the specified range of the receiver into ascending order (
false < true).
- quickSortFromTo(int, int) - Method in class cern.colt.list.tbyte.AbstractByteList
-
Sorts the specified range of the receiver into ascending numerical order.
- quickSortFromTo(int, int, ByteComparator) - Method in class cern.colt.list.tbyte.AbstractByteList
-
Sorts the receiver according to the order induced by the specified
comparator.
- quickSortFromTo(int, int) - Method in class cern.colt.list.tchar.AbstractCharList
-
Sorts the specified range of the receiver into ascending numerical order.
- quickSortFromTo(int, int, CharComparator) - Method in class cern.colt.list.tchar.AbstractCharList
-
Sorts the receiver according to the order induced by the specified
comparator.
- quickSortFromTo(int, int) - Method in class cern.colt.list.tdouble.AbstractDoubleList
-
Sorts the specified range of the receiver into ascending numerical order.
- quickSortFromTo(int, int, DoubleComparator) - Method in class cern.colt.list.tdouble.AbstractDoubleList
-
Sorts the receiver according to the order induced by the specified
comparator.
- quickSortFromTo(int, int) - Method in class cern.colt.list.tfloat.AbstractFloatList
-
Sorts the specified range of the receiver into ascending numerical order.
- quickSortFromTo(int, int, FloatComparator) - Method in class cern.colt.list.tfloat.AbstractFloatList
-
Sorts the receiver according to the order induced by the specified
comparator.
- quickSortFromTo(int, int) - Method in class cern.colt.list.tint.AbstractIntList
-
Sorts the specified range of the receiver into ascending numerical order.
- quickSortFromTo(int, int, IntComparator) - Method in class cern.colt.list.tint.AbstractIntList
-
Sorts the receiver according to the order induced by the specified
comparator.
- quickSortFromTo(int, int) - Method in class cern.colt.list.tlong.AbstractLongList
-
Sorts the specified range of the receiver into ascending numerical order.
- quickSortFromTo(int, int, LongComparator) - Method in class cern.colt.list.tlong.AbstractLongList
-
Sorts the receiver according to the order induced by the specified
comparator.
- quickSortFromTo(int, int) - Method in class cern.colt.list.tobject.ObjectArrayList
-
Sorts the specified range of the receiver into ascending order, according
to the natural ordering of its elements.
- quickSortFromTo(int, int, Comparator) - Method in class cern.colt.list.tobject.ObjectArrayList
-
Sorts the receiver according to the order induced by the specified
comparator.
- quickSortFromTo(int, int) - Method in class cern.colt.list.tshort.AbstractShortList
-
Sorts the specified range of the receiver into ascending numerical order.
- quickSortFromTo(int, int, ShortComparator) - Method in class cern.colt.list.tshort.AbstractShortList
-
Sorts the receiver according to the order induced by the specified
comparator.